top of page


Water Level Meters are used for convenient and accurate measurement of elevation of groundwater in boreholes, standpipes and wells. They have a high accuracy, are NIST traceable, don't stretch, have a flat tap and are permanently marked in 1 mm or 1/100 ft graduations. Water Level Meters come with a sturdy winding reel, with a brake and carrying handle. The meter uses a stainless steel probe attached to the flat tape. The probe has an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and light. The water level is then determined by taking a reading directly from the tape. Sensitivity controls are standard, which allows the buzzer to be turned off in cascading water, and ensures a clear signal in both high and low conductivity conditions.

  • Ultra-wide, user defined, conductivity range

  • Can be used in different liquids ranging from pure water to neat cement grout

  • Resolution of 1 mm (1/100 ft)

  • Accuracy of 0.1%

  • 7 strand, 24 gauge stainless steel conductors

  • 13 mm (0.5 in) O.D. stainless steel probe

  • NIST traceable

bottom of page